PFM-4000
Tube / Pipe Facing Machine Flange Facer
It is quick and simple to re-machine damaged flange faced and raised faced ID mount Flange facing machine. This design is based on our PFM-4000 which is converted to Flange facer using special attachment. Suitable for tubes and pipes in the size range of 35mm ID to 104mm ID (1.38” - 4”).
Easy to handle and quick to setup
Internal locking system for safety and better accuracy.
FEATURES
- LIGHT WEIGHT BODY - High pressure cast aluminum body allows continuous operation under the harshest conditions.
- ROBUST TOOL HOLDER - Holds the cutting tool bits tightly at the desired position. Its robust construction and support to the cutting bits ensure vibration free performance.
- FEED SHAFT - High strength, precise machined and hardened feed shaft provides a strong support to the assembly which slides over it.
- FEED SPROKET - Quick and easy redial feed provide to the tool bit.
- CARRIER - Light weight, high pressure cast aluminum body.
- PNEUMATIC OR ELECTRIC DRIVE - High quality pneumatic or electric drive for reliable service and long working life.
Locking Range mm (inch) : 35 - 104 (1.3/8” - 4”)
Application Range mm (inch) : 35 - 356 (1.38”- 14”)
Idle Speed rpm: 70
Torque Speed Rate/Pin : 0.16 (0.0062)
Feeding Stroke mm (inch) : 17 (0.67”)
Pneumatic Power HP : 0.83
Air Consumption cfm : 55
Air Pressure bar (psi) : 6.2 (90)
Net Weight kg (lb) : 14.2 (31.3)
Locking Range mm (inch) : 35 - 104 (1.3/8” - 4”)
Application Range mm (inch) : 35 - 356 (1.38”- 14”)
Idle Speed rpm: 75
Torque Speed Rate/Pin mm (inch) : 0.16 (0.0062)
Feeding Stroke mm (inch) : 17 (0.67”)
Electric Power Watts : 1000
Voltage V : 110 / 220
Net Weight kg (lb) : 15.3 (33.7)
Get a Quote Now FOR FREE
GET A QUOTE for your new Pipe/Tube Bevelling Machine PFM-4000 right now!
Chat Now 
